「EPDM」DN100三元乙丙橡胶膨胀节“三方含量检测报告”

来源:http://www.songjiangsuzhou.com/ 作者:上海淞江集团 时间:2019-09-11 14:45
上海淞江减震器集团有限公司官方网站为您介绍:【EPDM】DN100三元乙丙橡胶接头“换热机组”信息,淞江集团为众多客户换热机组厂家提供耐高温橡胶接头,主要采用三井4045三元乙丙橡胶生产,其中含量达到50%左右,我厂有三方含量检测报告,假一赔十。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN100 EPDM Ternary Ethylene-propylene Rubber Joint "Heat Exchanger Unit" information, Songjiang Group provides high temperature resistant rubber joint for many customers heat exchanger manufacturers, mainly using Sanjing 4045 Ternary Ethylene-propylene Rubber production, which content reaches about 50%, our factory has three. Square content test report, false one compensate ten.

【EPDM】DN100三元乙丙橡胶接头“换热机组”









说明:
我公司耐高温橡胶接头阀体上刻有上海松夏字样,松夏是上海淞江减震器集团有限公司旗下高端品牌,我公司所有特殊橡胶接头阀体上都刻有上海松夏字样(25kg、耐油、耐酸碱、耐高温、耐磨、双球、异径),如果产品上没有刻上海松夏字样的产品不是特殊产品,阀体上刻有上海淞江减震器集团有限公司字样的产品都是16kg过水产品,并非特殊产品。相关证明:松夏与淞江集团关系证明
Explain:
Our company's high-temperature rubber joint valve body engraved with Shanghai Songxia, Songxia is a high-end brand of Shanghai Songjiang Shock Absorber Group Co., Ltd. All our company's special rubber joint valve body engraved with Shanghai Songxia (25kg, oil, acid and alkali resistance, high temperature resistance, wear resistance, double ball, different diameter), if the product does not have The products engraved with Shanghai Songxia characters are not special products. The products engraved with Shanghai Songjiang Shock Absorber Group Co., Ltd. on the valve body are all 16KG aquatic products, not special products.

名称:EPDM橡胶接头
型号:KXT-EPDM
口径:DN100
压力:1.6Mpa
长度:150mm
轴向压缩:18mm
轴向拉伸:10mm
横向位移:12mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海淞江减震器集团有限公司
资质证书:合格证、质保书、检验报告、橡胶接头行业TS压力管道生产许可证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN100
Pressure: 1.6Mpa
Length: 150mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

相关链接:EPDM橡胶接头含量检测报告
Related links


以下是淞江集团介绍:
The following is the introduction of Songjiang group









本文首发地址:http://www.songjiangfuzhou.com/320.html