「EPDM」DN250单球耐高温橡胶膨胀节“耐高温120度以下”

来源:http://www.songjiangsuzhou.com/ 作者:上海淞江集团 时间:2019-09-11 14:49
淞江集团为众多热力供暖工程提供耐高温橡胶接头产品,耐高温120度以下,采用三井4045三元乙丙橡胶接头,含量达到50%左右,具有良好的减震和降噪效果。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces: [EPDM] DN250 single ball high temperature resistant rubber joint "direct connection heating" information. Meijiang Group provides high temperature resistant rubber joint products for many thermal heating projects. It can withstand high temperature below 120 degrees and adopts Sanjing 4045 EPDM joint, the content of which is about 50%. It has good shock absorption and noise reduction effect.

【EPDM】DN250单球耐高温橡胶接头“直连供暖”









说明:
我公司耐高温橡胶接头阀体上刻有上海松夏字样,松夏是上海淞江减震器集团有限公司旗下高端品牌,我公司所有特殊橡胶接头阀体上都刻有上海松夏字样(25kg、耐油、耐酸碱、耐高温、耐磨、双球、异径),如果产品上没有刻上海松夏字样的产品不是特殊产品,阀体上刻有上海淞江减震器集团有限公司字样的产品都是16kg过水产品,并非特殊产品。相关证明:松夏与淞江集团关系证明
Explain:
Our company's high-temperature rubber joint valve body engraved with Shanghai Songxia, Songxia is a high-end brand of Shanghai Songjiang Shock Absorber Group Co., Ltd. All our company's special rubber joint valve body engraved with Shanghai Songxia (25kg, oil, acid and alkali resistance, high temperature resistance, wear resistance, double ball, different diameter), if the product does not have The products engraved with Shanghai Songxia characters are not special products. The products engraved with Shanghai Songjiang Shock Absorber Group Co., Ltd. on the valve body are all 16KG aquatic products, not special products.

名称:耐高温橡胶接头
型号:KXT-EPDM
口径:DN250
压力:1.6Mpa
长度:230mm
轴向压缩:25mm
轴向拉伸:14mm
横向位移:15mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海淞江减震器集团有限公司
资质证书:合格证、质保书、检验报告、橡胶接头行业TS压力管道生产许可证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: high temperature resistant rubber joint
Model: KXT-EPDM
Caliber: DN250
Pressure: 1.6Mpa
Length: 230mm
Axial compression: 25mm
Axial tension: 14mm
Lateral displacement: 15mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

相关链接:耐高温橡胶接头案例
Related links


以下是淞江集团介绍:
The following is the introduction of Songjiang group









相关链接:橡胶接头资质证书
Related links

本文首发地址:http://www.songjiangfuzhou.com/324.html